|
|
|
|
|
|
Camaro hood safety Hood latch chrome steel spring bolts hardware 1967 - 1981
|
|
|
Chevy Camaro 1967-1981 and Chevelle 1967-1972 with 4 bolt latch, Comes with chrome mounting bolts and hardware.
|
|
|
|
|
|
|
|
|
|
BILLET ALUMINUM UPPER HOOD LATCH 1967-1981 CHEVY CAMARO - BLACK
|
|
|
BILLET ALUMINUM UPPER HOOD LATCH 1967-1981 CHEVY CAMARO - BLACK Chevy Camaro 1967-1981 and Chevelle 1967-1972 with 4 bolt BLACK latch, Comes with mounting bolts and hardware.
|
|
|
|
|
|
|
|
|
|
BILLET ALUMINUM UPPER HOOD LATCH 1967-1981 CHEVY CAMARO - POLISHED
|
|
|
BILLET ALUMINUM UPPER HOOD LATCH 1967-1981 CHEVY CAMARO - POLISHED Chevy Camaro 1967-1981 and Chevelle 1967-1972 with 4 bolt POLISHED latch, Comes with mounting bolts and hardware.
|
|
|
|
|
|
|
|
|
|
Billet Aluminum Hood Hinge Ford Truck 1953 1954 1955 1956 Polished
|
|
|
Billet Polished Aluminum Hood Hinges for 1953-56 Ford
●High strength, precision billet aluminum construction
●Utilizes sealed bearings & stainless steel nitrogen gas struts (included) for smooth operation
●Bolt-on application for steel, fiberglass, or carbon fiber hoods (specify when ordering)
●Available in raw machined or bright polished finish as well as a variety of Fusioncoat and anodized colors
●Sold in pairs
●Made in the USA
Eddie Motorsports manufactures billet aluminum hood hinges for most models of Chevrolet and Ford muscle cars as well as some trucks. The hinges are CNC machined from solid chunks of 6061-T6 billet aluminum in the USA at our southern California facility. The hinges utilize a stainless steel nitrogen filled strut in place of the inferior stock compression springs to actuate the hood. The hinges use high quality sealed ball bearings at all pivot points for an ultra smooth and reliable operation. The hinges are available with a raw machined or bright polished finish or in a wide variety of anodized and Fusioncoated colors. Designed as direct fit, “bolt on” units, the hinges utilize the stock mounting holes with elongated slots for ease of gap adjustment.
Whether you are looking for the ultimate in under-hood customizing or just want to replace your weak stamped-steel stock hood hinges with these stout billet pieces, Eddie Motorsports hinges are the answer.
|
|
|
|
|
|
|
|
|
|
63-65 Nova Billet Aluminum Hood Hinges Polished Finish Pair chevy II 2 chevrolet
|
|
|
POLISHED Billet Aluminum Hood Hinges for 1963-65 Nova
●High strength, precision billet aluminum construction
●Uhtilizes sealed bearings & stainless steel nitrogen gas struts (included) for smooth operation
●Bolt-on application for steel, fiberglass, or carbon fiber hoods (specify when ordering)
●Available in raw machined or bright polished finish as well as a variety of Fusioncoat and anodized colors
●Sold in pairs
●Made in the USA
Eddie Motorsports manufactures billet aluminum hood hinges for most models of Chevrolet and Ford muscle cars as well as some trucks. The hinges are CNC machined from solid chunks of 6061-T6 billet aluminum in the USA at our southern California facility. The hinges utilize a stainless steel nitrogen filled strut in place of the inferior stock compression springs to actuate the hood. The hinges use high quality sealed ball bearings at all pivot points for an ultra smooth and reliable operation. The hinges are available with a raw machined or bright polished finish or in a wide variety of anodized and Fusioncoated colors. Designed as direct fit, “bolt on” units, the hinges utilize the stock mounting holes with elongated slots for ease of gap adjustment.
Whether you are looking for the ultimate in under-hood customizing or just want to replace your weak stamped-steel stock hood hinges with these stout billet pieces, Eddie Motorsports hinges are the answer.
|
|
|
|
|
|
|
|
|
|
67 68 69 Chevy Camaro Billet Aluminum Hood Hinges Machined Pair
|
|
|
Billet machined Aluminum Hood Hinges for 1967-69 Camaro
●High strength, precision billet aluminum construction
●Utilizes sealed bearings & stainless steel nitrogen gas struts (included) for smooth operation
●Bolt-on application for steel, fiberglass, or carbon fiber hoods (specify when ordering)
●Sold in pairs
●Made in the USA
Eddie Motorsports manufactures billet aluminum hood hinges for most models of Chevrolet and Ford muscle cars as well as some trucks. The hinges are CNC machined from solid chunks of 6061-T6 billet aluminum in the USA at our southern California facility. The hinges utilize a stainless steel nitrogen filled strut in place of the inferior stock compression springs to actuate the hood. The hinges use high quality sealed ball bearings at all pivot points for an ultra smooth and reliable operation. The hinges are available with a raw machined or bright polished finish or in a wide variety of anodized and Fusioncoated colors. Designed as direct fit, “bolt on” units, the hinges utilize the stock mounting holes with elongated slots for ease of gap adjustment.
Whether you are looking for the ultimate in under-hood customizing or just want to replace your weak stamped-steel stock hood hinges with these stout billet pieces, Eddie Motorsports hinges are the answer.
|
|
|
|
|
|
|
|
|
|
1965 1966 1967 CHEVELLE EL CAMINO BILLET Aluminum HOOD HINGES Machined MADE IN U.S.A.
|
|
|
Billet machined Aluminum Hood Hinges for 1965-67 Chevelle
●High strength, precision billet aluminum construction
●Utilizes sealed bearings & stainless steel nitrogen gas struts (included) for smooth operation
●Bolt-on application for steel, fiberglass, or carbon fiber hoods (specify when ordering)
●
●Sold in pairs
●Made in the USA  Eddie Motorsports manufactures billet aluminum hood hinges for most models of Chevrolet and Ford muscle cars as well as some trucks. The hinges are CNC machined from solid chunks of 6061-T6 billet aluminum in the USA at our southern California facility. The hinges utilize a stainless steel nitrogen filled strut in place of the inferior stock compression springs to actuate the hood. The hinges use high quality sealed ball bearings at all pivot points for an ultra smooth and reliable operation. The hinges are available with a raw machined or bright polished finish or in a wide variety of anodized and Fusioncoated colors. Designed as direct fit, “bolt on” units, the hinges utilize the stock mounting holes with elongated slots for ease of gap adjustment. Whether you are looking for the ultimate in under-hood customizing or just want to replace your weak stamped-steel stock hood hinges with these stout billet pieces, Eddie Motorsports hinges are the answer.
|
|
|
|
|
|
|
|
|
|
68-79 Nova Billet Aluminum Hood Hinges Machined Finish Pair CHEVY CHEVROLET
|
|
|
MACHINED Billet Aluminum Hood Hinges for 1968-79
●High strength, precision billet aluminum construction
●Utilizes sealed bearings & stainless steel nitrogen gas struts (included) for smooth operation
●Bolt-on application for steel, fiberglass, or carbon fiber hoods (specify when ordering)
●Available in raw machined or bright polished finish as well as a variety of Fusioncoat and anodized colors
●Sold in pairs
●Made in the USA
Eddie Motorsports manufactures billet aluminum hood hinges for most models of Chevrolet and Ford muscle cars as well as some trucks. The hinges are CNC machined from solid chunks of 6061-T6 billet aluminum in the USA at our southern California facility. The hinges utilize a stainless steel nitrogen filled strut in place of the inferior stock compression springs to actuate the hood. The hinges use high quality sealed ball bearings at all pivot points for an ultra smooth and reliable operation. The hinges are available with a raw machined or bright polished finish or in a wide variety of anodized and Fusioncoated colors. Designed as direct fit, “bolt on” units, the hinges utilize the stock mounting holes with elongated slots for ease of gap adjustment.
Whether you are looking for the ultimate in under-hood customizing or just want to replace your weak stamped-steel stock hood hinges with these stout billet pieces, Eddie Motorsports hinges are the answer.
|
|
|
|
|
|
|
|
|
|
1963 1964 Chevy Impala Billet Aluminum Hood Hinges Machined Finish Chevrolet
|
|
|
Billet Machined Aluminum Hood Hinges for 1963-64 Impala ●High strength, precision billet aluminum construction
●Utilizes sealed bearings & stainless steel nitrogen gas struts (included) for smooth operation
●Bolt-on application for steel, fiberglass, or carbon fiber hoods (specify when ordering)
●Available in raw machined or bright polished finish as well as a variety of Fusioncoat and anodized colors
●Sold in pairs
●Made in the USA
Eddie Motorsports manufactures billet aluminum hood hinges for most models of Chevrolet and Ford muscle cars as well as some trucks. The hinges are CNC machined from solid chunks of 6061-T6 billet aluminum in the USA at our southern California facility. The hinges utilize a stainless steel nitrogen filled strut in place of the inferior stock compression springs to actuate the hood. The hinges use high quality sealed ball bearings at all pivot points for an ultra smooth and reliable operation. The hinges are available with a raw machined or bright polished finish or in a wide variety of anodized and Fusioncoated colors. Designed as direct fit, “bolt on” units, the hinges utilize the stock mounting holes with elongated slots for ease of gap adjustment.
Whether you are looking for the ultimate in under-hood customizing or just want to replace your weak stamped-steel stock hood hinges with these stout billet pieces, Eddie Motorsports hinges are the answer.
|
|
|
|
|
|
|
|
|
|
1965 1966 1967 Chevy IMPALA BILLET Aluminum HOOD HINGES machined chevrolet
|
|
|
Billet Machined Aluminum Hood Hinges for 1965 1966 1967 Chevy IMPALA
●High strength, precision billet aluminum construction ●Utilizes sealed bearings & stainless steel nitrogen gas struts (included) for smooth operation
●Bolt-on application for steel, fiberglass, or carbon fiber hoods (specify when ordering)
●Available in raw machined or bright polished finish as well as a variety of Fusioncoat and anodized colors
●Sold in pairs
●Made in the USA
Eddie Motorsports manufactures billet aluminum hood hinges for most models of Chevrolet and Ford muscle cars as well as some trucks. The hinges are CNC machined from solid chunks of 6061-T6 billet aluminum in the USA at our southern California facility. The hinges utilize a stainless steel nitrogen filled strut in place of the inferior stock compression springs to actuate the hood. The hinges use high quality sealed ball bearings at all pivot points for an ultra smooth and reliable operation. The hinges are available with a raw machined or bright polished finish or in a wide variety of anodized and Fusioncoated colors. Designed as direct fit, “bolt on” units, the hinges utilize the stock mounting holes with elongated slots for ease of gap adjustment.
Whether you are looking for the ultimate in under-hood customizing or just want to replace your weak stamped-steel stock hood hinges with these stout billet pieces, Eddie Motorsports hinges are the answer.
|
|
|
|
